features rohs compliant* convex termination style 2 isolated elements in an 02 package width resistance tolerance: ? % resistance range: 10 ohms to 1 megohm & zero-ohm jumper sulfur-resistant design cay06-as series - sulfur-resistant thick film chip arrays * rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their speci c applications. general characteristics *rohs compliant characteristic cay06-as number of elements (isolated) 2 power rating @ 70 c per resistor 31 mw resistor tolerance 5 % resistance range (e24) plus zero-ohm jumper 10 ohms to 1 megohm temperature coe ? cient of resistance (tcr) 200 ppm maximum overload voltage 25 v maximum working voltage 12.5 v operating temperature range -55 to +125 c storage conditions +5 ~ +40 c, 25~75 % rh, 1 year derating temperature +70 c packaging (paper tape) 10,000 pcs. per reel zero-ohm jumper: current rating maximum resistance 1 a per element 100 milliohms environmental characteristics speci cation test method (jis c 5201-1) characteristics short time overload rated voltage x 2.5, 5 seconds (2 % +0.1 ohm) soldering heat +260 c 5 c, 10 1 seconds (1 % +0.05 ohm) temperature cycling -55 c (30 minutes) - normal (2~3 minutes) +125 c (30 minutes) - normal (2~3 minutes), 5 cycles (1 % +0.05 ohm) moisture load life +40 c, 90~95 % rh, 1000 hours, 1.5 hours on, 0.5 hours off (3 % +0.1 ohm) load life +70 c, 1000 hours, 1.5 hours on, 0.5 hours off (3 % +0.1 ohm) sulfur test 3 ppm h2s, +50 c, 90~95 % rh, 100 hours (5 % +0.1 ohm) note: zero-ohm jumper <100 milliohms. how to order ca y 06 - 103 j 2 as chip array type ? y = convex model ? 06 = 02 package width resistance code ? first two digits are signi cant, third digit represents number of zeros to follow (example: 103 = 10k ohms) ? 000 = zero-ohm jumper resistance tolerance ? j = 5 % resistors ? 2 = 2 resistors special characteristics ? as = sulfur-resistant, tin-plated terminations (rohs compliant) for standard values used in capacitors, inductors, and resistors, click here. soldering pro le 25 75 125 175 225 275 0 50 100 150 200 250 300 time (seconds) temperature (c) 60 - 120 seconds 60 - 90 seconds 260 ? peak 190 ? 150 ? 220 ? ramp down 6 ?/second 255 ? maximum of 20 seconds between +255 ? and +260 ? ramp up 3 ?/second maximum 10 seconds minimum <1> <1> construction protective glass overcoat high purity alumina substrate termination thick film resistive element
packaging speci cations dimensions: mm (inches) speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their speci c applications. cay06-as series - sulfur-resistant thick film chip arrays product dimensions dimensions: mm (inches) recommended land pattern 10/16 a t b b g g w p l dim. cay06-as l 0.85 0.05 (0.033 0.002) w 0.60 0.05 (0.024 0.002) t 0.35 0.05 (0.014 0.002) p 0.50 0.05 (0.020 0.002) a 0.37 0.05 (0.015 0.002) b 0.11 0.05 (0.004 0.002) g 0.17 0.05 (0.007 0.002) 0.30 (.012) 0.30 ( .012 ) 0.30 (.012) 0.30 (.012) 0.50 ( .020) 180 (7.087) 2.0 ?0.5 (.079 ?.020) 60 (2.362) 21.0 ?0.8 (.827 ?.031) 13.0 ?0.2 (.511 ?.008) 11.4 ?1.0 (.449 ?.040) 9.0 ?0.3 (.354 ?.012) orientation of part in tape 4 3 1 2 8.00 ?0.30 (.315 ?.012) 3.50 ?0.05 (.138 ?.002) 1.75 ?0.10 (.069 ?.004) 2.75 ?0.10 (.108 ?.004) 4.00 ?0.10 (.157 ?.004) 2.00 ?0.05 (.079 ?.002) 1.00 ?0.04 (.039 ?.001) 0.70 ?0.04 (.028 ?.001) 2.00 ?0.05 (.079 ?.002) 1.50 +0.10/-0 (.059 +.004/-0) dia. 4.00 ?0.10 (.157 ?.004) 0.48 ?0.05 (.019 ?.002) asia-paci c: tel: +886-2 2562-4117 ? email: asiacus@bourns.com emea: tel: +36 88 520 390 ? email: eurocus@bourns.com the americas: tel: +1-951 781-5500 ? email: americus@bourns.com www.bourns.com derating curve a e oa mbien tem . 70 125 -55 0 20 40 60 80 100 40 60 80 100 120 140 160 isolated circuit r 4 1 r 3 2 typical part marking marking .........refer to product dimensions marking color ...................................yellow
|
